So applying middle pedal in a car to slow speed. Apply the brake firmly and gently. If you put your foot on the pedals of a car with ABS, you will feel the brakes bouncing under your feet, sometimes hard. Don’t be scared and don’t let go, it just means the brakes are working. Press the brake pedal quickly, but not immediately. This is necessary to maximize the braking potential of the vehicle. The goal is for the car’s tires to barely break traction. However, if your car has ABS, be careful to avoid “squeezing” the brakes. The goal is to apply the brakes quickly and deeply while pedaling with your left foot to stabilize your body. As vehicle speed slows, you can release the brakes gradually and smoothly to keep them at peak efficiency. Do not brake and turn at the same time. Smooth steering when braking will help you avoid a collision.
However, never turn or pull the steering wheel as this could cause you to lose control of your vehicle. People often swerve to avoid small animals and end up crashing into a tree or other vehicle. In some situations, such as when a child jumps in front of your car, it may be appropriate to turn while applying the brakes. You should practice in a safe environment to see how the car reacts. Here are some ways to slow down the car.
Applying middle pedal in a car to slow speed – Steering brake.
Steer the steering wheel through the turn, slowing down slightly. This leans the car forward, pressing the front wheels against the ground and increasing traction. It’s a basic technique, and without it you can’t do turns.
Trail braking.
This is a gentle cornering braking method that provides the safest and best control of the vehicle when the vehicle is leaning on the front wheels, thereby increasing the grip of these tires on the road.
Emergency stop.
If you need to stop quickly, you don’t have to worry about breaking even in the middle of a bend when using ABS, keep the pedal fully depressed. Without ABS, it breaks a little harder (70%) and turns a little less.
Avoid using the transmission for quick stops.
The gearbox is designed to speed up the car, not slow it down. The load point design on the drive sprocket is not designed for this. The situation is different if you are driving a tractor-trailer. The reason they have air brakes and engine brakes has nothing to do with a car. However, it is recommended to use engine braking to hold or slow down on longer downhill sections.The heat generated is absorbed by the engine and efficiently removed by the coolant, radiator and fan, preventing the brakes from overheating and therefore more effective when maximum braking is required.
Focus on the places you want to visit, not the places you want to avoid. It’s hard to avoid what you’re looking at directly, and many people tend to focus on what they’re afraid to face. Instead, focus on where you want the car to go (toward the object) and pay attention to how the car feels whether it’s in OSP or locked.
Applying middle pedal in a car to slow speed – Braking and parking cars without ABS
If your car does not have ABS, you should not apply the brakes. Instead, you should press the brake pedal hard with your foot to stop the car as quickly as possible. You should pedal until the tire begins to slip, which is the tire’s traction limit.If you press the pedal too hard, you will lock the brakes and lose control of the car. Brake to the limit before the brake locks. This is called “threshold braking” and it will bring your car to a stop as quickly as possible. Listen for the soft screech of the tires and it will tell you that you haven’t reached your limit and that you are doing the right thing. If the wheels lock up and you lose control of the car, then you’ve gone too far and need to brake again.
Don’t look at the object you bump into.
Look to both sides of the object and try to push the car away from it, instead of hitting the object head-on. If you’re passionate about what you’re about to do, you won’t be able to focus on the inhibition threshold, which requires your full attention. Four Rest your left foot on the floor. Keeping your left foot on the ground will help protect your body from injury and teach you how to adjust the brake pedal properly.
Applying middle pedal in a car to slow speed – Practice threshold inhibition.
Mastering this style of braking takes time and practice, and if the time is right, braking in an open parking lot can increase your chances of success. Moreover, practicing hard and light braking in your daily life can help you improve your braking skills and can save your life at the right time. You can measure this by placing markers for when to start braking and when to stop, and you can visually see the difference between a locked and unlocked tire.
Intentionally locking the brakes. Now try to reduce the pressure on the pedal until it no longer locks up, then press the OSP or we can say Optimal Compression Point again. You will inevitably check your OSP or change the road surface while braking, so this practice is very important. Attention there will be a different OSP for each surface and speed. This is why it is necessary to practice in dry weather, then in the rain and, if possible, during snowfall.