How to drift a car this is going to be the main topic for today article. I know there are so many people that want to drift their cars but don’t know the correct way to do that. So i will explain you guys the easiest way and safest way to do this. Choose a car with a manual transmission for easier drifting. Cars with a manual transmission have a clutch pedal and gear lever that control the engine. Autonomous cars will solve this problem for you. When you’re drifting, the added control allows you to get the right speed and angle you need to get through the turns. You can still use parking brake technology to drift in a self-driving car. Use the parking brake or emergency brake to steer the car, but don’t be surprised if this technique takes some practice to master.
How to drift a car – Choose a rear-wheel drive car for more efficient drifting
When the car is rear-wheel drive, the engine only drives the rear wheels. The engine of other cars takes care of the front wheel or all 4 wheels. The rear wheels are what you need when drifting, so rear-wheel drive cars are easier to control. When choosing a vehicle, find out what systems it has by consulting the owner’s manual or browsing the Internet. Another option is a four-wheel drive vehicle in which the engine drives all four wheels. The best 4x4s are those with the strongest rear wheels. You will need to test drive the vehicle to determine which wheels are best for the road. Front wheel drive cars are difficult to drift without a lot of practice. The front wheels steer the car, preventing it from skidding. You end up with under steer, which means the car doesn’t turn the way you’d like.
Driving with worn tires is more likely to skid. Worn tires have less traction, so your car turns more easily. The front tires don’t really matter, but if your car doesn’t drift well, using an old rear tire could make all the difference. Try to leave a spare set of tires in the car before training. Cheap tires, even new ones, often help with skidding.Many vehicles are equipped with automatic steering or stabilization systems. If changing tires isn’t enough, disabling these systems will make skidding easier. However, if you don’t know the car well, driving without these systems is dangerous.
Choose a safe place away from traffic to go Drifting.
Skidding is dangerous, never do it on busy roads, near buildings, or anywhere else you might hit something. Ideally, find a track where you can practice. Otherwise, find an empty parking lot and put a bucket there to swim in. You can always find experts through social media. You can reserve a time when you have a clue. Driving on a wet road or track can also make skidding easier. Try to go out after a light rain or snow. Please note that slippery surfaces can make rafting more dangerous than usual.
Turn at approximately 30 miles 48 kilometers per hour. This is the ideal speed for cornering. If you have a manual gearbox, shift into second gear and increase engine speed to 3000 rpm. If you drive too fast, you can lose control while swerving. You drive slower, you may not have enough speed to go around the corner. In drifting, speed is not the most important thing. Good control is essential both for unbalancing the car and for your safety while drifting.
How to drift a car – Turn the steering wheel in the direction of the turn
Once per turn, start driving it. Spin the wheel slightly, not too much. This will prepare you to drift, but you are not ready to start. Temporarily hold the vehicle closer to the inside of the turn. Keep your hands on the wheel so you’re ready to drive. It is in charge of skidding and positioning the car when it is turned on. Steer the wheel into the corner while pressing down on the gas pedal. Try to do both. This time, press hard on the gas pedal and spin the wheels hard. If driving is successful, you will feel the car begin to skid as the rear wheels lose traction. If you’re having trouble starting a drift, using the parking brake or clutch can help. Combine handbrake or clutch technology with assisted shifting.
Stay away from the curve and start drifting around the corners. Hurry up to keep control of the car. If you succeed, the car will tell you where you want to go. Remember to turn the steering wheel hard to level the car. Also, keep stepping on the accelerator to increase the throttle. If you don’t apply enough force, the rear of the car will move in a circle, resulting in a skid. Pay no attention to the accelerator pedal. It’s easy to forget to use the gas at this point, especially if you’re not used to drifting.
How to drift a car – Straighten the car after the turn.
Release the throttle to slow down. As the vehicle begins to stabilize again, gradually turn the wheels into the curve. Focus on driving where you want to go. As soon as the front of the car clears the curve, you can start moving toward the road. Once the car has stabilized, you can also step on the gas and start moving.
So this is all about How to drift a car. By following the steps you can easily learn how to drift. Remember that you need to do this under safety.